Hydrel 4426 DMX Color Change LED Wet Niche Swimming Pool Light

The Hydrel 4426 DMX Color Changing LED Swimming Pool Fixture is designed to be recessed into a stainless steel niche as a "wet niche" type fixture. These units use a Red, Green and Blue (RGB) underwater color balanced LED array to create DMX controlled color changing lighting effects.  Color control is achieved through four channels per fixture, standard DMX512 hardware, at a maximum of 44 frames per second.  All channels have logarithmic power for finer color and intensity control.  The fourth channel, Intensity, allows the user to vary brightness without affecting the color.  The integral power and control modules are enclosed in an attached sealed combination box.  The proprietary control module senses the LED temperature and adjusts the LED power accordingly to yield a lamp life of up to 50,000 hours of operation, exceeding the lamp life of any other fixture designed for this use.  Power and signal are distributed to the fixture via a double conduit system which terminates into standard conduit entrances at the back of the niche.

Features & Specifications:

• Fixture Housing & Door: Heavy wall cast bronze construction.  Natural cast bronze finish.  Stainless steel bezel finish also available.
• Niche: Stainless steel with cast bronze mounting ring which locks the fixture into position.  Niche has four ears to tie to forms or steel structural rods.  Pressure grounding lugs on interior and exterior surfaces.  Niche conduit entrances are 3/4" NPT.
• LED Type: 60 Watt RGB LED array (LED Board included).
• Control: Standard DMX512. 3 channels (Red, Green, Blue) or 4 channels (Red, Green, Blue, Intensity) per fixture.
• Communication to Fixture: DMX512 direct.
• Voltage: 120V AC 60 Hz.
• Lens: 8 5/8" diameter convex linear spread tempered glass.
• Gasket: Single piece molded U-shaped silicon gasket.
• Cord: Minimum of 35' of #16/3ST submersible rated cord for standard 120V AC line, minimum of 35' of submersible rated data cord for DMX512 signal.  Cord entrance is epoxy encapsulated.  Cord length must be specified with sufficient cord coiled into niche to allow for above water maintenance.
• Factory Leak Tested: Fixtures are tested at 10 PSI (0.70 kg/cm2) internal pressure while totally submerged in water
• Low Water Protection: temperature sensing low water cut-off standard.
• Listing: UL

For more information on the Hydrel 4426 LED Wet Niche fixture or any of our other products, please download our catalog or contact us directly to place your order.